English
Español
Deutsch
中文简体
Product Consultation
Your email address will not be published. Required fields are marked *
100A Single Phase Din Rail Multi-function Meter for EV Charging Metering
Aug 11,2022
MID & UL Approved Three Phase Din Rail Type Multi-function Energy Meter for EV Charging Metering
Nov 24,2022
MID/ UL Approved Single Phase Din Rail Type Multi-function Energy Meter for EV Charging Metering
Nov 24,2022
CT Type Three Phase Din Rail Wifi Energy Meter for PV Metering
May 30,2025
RS485 CT Connection Three Phase Din Rail Energy Meter for PV Metering
May 30,2025
MID/UL CT Type Din Rail Three Phase Multi-function Energy Meter for EV Charging Metering
Nov 24,2022Content
Modern electrical installations require more than a simple indication of voltage or current. Building owners, facility managers, electrical contractors, renewable-energy operators, and industrial users increasingly need a complete view of how energy is generated, distributed, consumed, and returned to the grid. Accurate measurement supports cost allocation, preventive maintenance, energy-efficiency programs, equipment evaluation, and compliance with billing or sub-metering requirements.
The SDM630-M is a three-phase multifunction energy meter designed for these applications. It combines direct measurement up to 100A, support for several wiring configurations, active and reactive energy measurement, pulse outputs, and RS485 Modbus RTU communication in a compact DIN rail format. It is intended for installations that need reliable measurement without the additional cost, space, and wiring complexity associated with external current transformers in circuits rated up to 100A.
As a MID energy meter, the unit is assessed and certified against the requirements of European measuring-instrument legislation. Its active-energy accuracy can be specified as Class 1 or Class 0.5 under IEC 62053-21, and as Class B or Class C under EN 50470-3:2022, depending on the selected version. These characteristics make the meter suitable for a wide range of commercial, industrial, building-management, and energy-monitoring applications.
The meter is also designed for integration. Its RS485 interface uses Modbus RTU, allowing measured values and operating data to be collected by building-management systems, energy-management software, programmable logic controllers, gateways, and supervisory platforms. Two pulse outputs provide an additional method of transmitting energy information to external counters or control systems.
Three-phase electrical systems are widely used in commercial buildings, factories, workshops, data centers, charging facilities, agricultural installations, and distributed-energy systems. Compared with single-phase systems, three-phase supplies can deliver more power efficiently and support balanced operation of motors and other loads. However, three-phase installations also require more comprehensive monitoring.
Measuring only total kilowatt-hours may not reveal the reason for rising energy costs or abnormal equipment behavior. A multifunction meter can show voltage, current, active power, reactive power, apparent power, frequency, power factor, maximum demand, and energy in both directions. This broader data set helps users understand the electrical condition of the system rather than viewing energy consumption as an isolated number.
Voltage measurements can help identify supply variation, phase imbalance, or undervoltage conditions. Current measurements can show loading levels and help prevent circuits from operating continuously near their limits. Active power indicates the energy being converted into useful work, while reactive power can reveal the effect of inductive or capacitive loads. Apparent power reflects the total electrical burden placed on the distribution system, and power factor helps assess how effectively current is being used.
Frequency information is useful in installations where supply stability must be monitored. Maximum demand measurement can support capacity planning and tariff management by recording the highest average demand over a preset period. Bidirectional measurement is important where electricity may flow in either direction, such as facilities with photovoltaic systems, battery storage, backup generation, or tenant sub-metering arrangements.
The SDM630-M is a DIN rail-mounted, three-phase multifunction energy meter for direct connection up to 100A. It supports three-phase three-wire systems, three-phase four-wire systems, and single-phase two-wire systems. This flexibility allows one meter family to serve different electrical architectures without requiring a completely different measurement platform for every project.
The unit measures RMS values, including harmonics, on three-phase AC systems. It can measure and display voltage, current, frequency, power, active energy, reactive energy, apparent power, power factor, and related electrical parameters. Energy can be measured as imported or exported energy, enabling monitoring of both consumption and generation.
Its maximum direct current rating is 100A. By accepting the current directly within the specified operating range, the meter can avoid the need for external current transformers in many low- and medium-capacity circuits. This can reduce component count, simplify installation, save panel space, and eliminate the ratio-selection and secondary-wiring considerations associated with CT-based measurement.
The meter provides two pulse outputs and one RS485 Modbus RTU communication interface. Pulse outputs can be connected to data loggers, pulse collectors, controllers, or legacy monitoring equipment. Modbus communication provides access to a broader set of measurements and settings for centralized energy management.
Configuration is password protected, helping reduce the risk of unauthorized changes to important parameters. Communication settings include selectable address, baud rate, parity, and stop-bit options, allowing the meter to be adapted to common industrial communication environments.
RS485 Modbus 100A Din Rail Three Phase MID Energy Meter
Active energy, expressed in kilowatt-hours, is the principal measurement used for electricity consumption and generation accounting. The SDM630-M measures active energy in both directions, making it possible to distinguish between imported energy from the supply and exported energy returned to the network.
Bidirectional measurement can be valuable in solar installations, where a building may consume energy from the grid during some periods and export surplus photovoltaic production during others. It can also support battery systems, generator applications, energy storage research, and facilities where power flow changes according to operating conditions.
Depending on the chosen version, active-energy accuracy is specified as Class 1 or Class 0.5 under IEC 62053-21 and as Class B or Class C under EN 50470-3:2022. These classifications give system designers a defined basis for selecting a meter according to the required level of accuracy and intended application.
Reactive energy is measured in kilovolt-ampere reactive hours. Reactive energy does not represent useful work in the same way as active energy, but it is an important characteristic of many electrical systems. Motors, transformers, fluorescent lighting systems, and other inductive equipment can create reactive demand that affects power factor and distribution capacity.
The meter provides Class 2 reactive-energy performance according to IEC 62053-23. This information can support power-factor correction studies, capacitor-bank assessment, equipment evaluation, and operational analysis in facilities where reactive demand is significant.
Apparent power, measured in kilovolt-amperes, combines the effects of active and reactive power. Monitoring apparent power helps users understand the total loading imposed on cables, transformers, switchgear, and generators. A facility may have acceptable active power consumption while still approaching the capacity of its distribution equipment because of reactive current or a low power factor.
The SDM630-M measures voltage and current on the supported phases and provides a clear view of electrical loading. The voltage measurement accuracy is specified at ±0.5%, while current measurement accuracy is also specified at ±0.5%. Frequency accuracy is specified at ±0.2%, and power-factor accuracy at ±1%.
Power factor is the relationship between active power and apparent power. A high power factor generally indicates that a greater proportion of the supplied current is contributing to useful work. A lower power factor can increase current for a given active load, potentially contributing to losses, voltage drop, and reduced available capacity.
Monitoring these parameters over time can reveal changes that might not be visible through energy totals alone. For example, a motor may consume a similar amount of active energy while its power factor changes because of altered loading or equipment deterioration. A rising current combined with stable power may indicate voltage reduction or system imbalance. Historical values collected through Modbus can help maintenance teams identify such patterns.
Maximum demand is the highest average demand recorded over a selected integration period. The SDM630-M can measure maximum demand current over preset periods of up to 60 minutes. This function is useful for facilities that need to understand peak loading, control demand-related charges, or assess whether available electrical capacity is being used efficiently.
Demand information can help organizations make informed decisions about equipment scheduling. Large loads may be staggered to avoid simultaneous operation, or the facility may use energy-management controls to reduce peaks. In an expansion project, recorded demand data can provide a more realistic basis for sizing new distribution equipment than relying only on connected-load calculations.
A significant advantage of the meter is its ability to work with several system configurations. It supports 3P4W, 3P3W, and 1P2W arrangements. Three-phase four-wire systems are common in low-voltage distribution networks that provide phase-to-neutral and phase-to-phase loads. Three-phase three-wire systems are widely used for certain industrial and motor applications. Single-phase two-wire compatibility extends the meter’s usefulness to simpler circuits and selected monitoring applications.
Rated voltage is specified as 230V line-to-neutral or 120V line-to-neutral, with an operational voltage range of 80% to 120% of the rated voltage. Installation designers must always confirm that the actual supply configuration, voltage, frequency, protective devices, and wiring arrangement are compatible with the selected model and applicable local regulations.
The unit requires voltage and current inputs in addition to the supply necessary to power the product. Correct wiring is essential for accurate measurement. Phase sequence, neutral connection where applicable, polarity, conductor sizing, isolation, and terminal torque should be checked by a qualified electrical professional before commissioning.
Because the meter supports direct current connection up to 100A, it can be installed in many distribution and sub-metering circuits without external CTs. This does not remove the need for suitable upstream protection or correctly rated conductors. Instead, it simplifies the measurement path while maintaining the requirement that the complete installation comply with electrical safety standards.
External current transformers are useful and sometimes necessary for high-current systems, but they introduce additional design and installation requirements. The transformer ratio must be selected correctly, secondary wiring must be routed and terminated carefully, and the meter must be configured to interpret the CT ratio accurately. In some applications, CTs also require additional space inside the switchboard.
Direct connection up to 100A avoids these requirements when the circuit falls within the meter’s specified limits. The result can be a faster installation and a cleaner panel layout. Fewer measurement components may also reduce opportunities for wiring errors, incorrect polarity, loose connections, and ratio mismatches.
The direct connection approach can be particularly attractive for commercial premises, small industrial distribution boards, apartment sub-metering, workshops, retail units, and local renewable-energy circuits. It can also simplify replacement projects where panel space is limited and adding CTs would require extensive modification.
Compared with a basic single-phase meter, the SDM630-M offers broader three-phase measurement and more flexible system compatibility. Compared with a conventional three-phase meter that provides only a local display, it adds communications and pulse outputs for integration into a wider monitoring system. Compared with a CT-based meter in a 100A application, it can reduce the hardware and labor associated with current transformation.
These advantages do not mean that a direct-connected meter is suitable for every installation. Circuits above the maximum current rating, installations with special voltage levels, and systems requiring isolated CT measurement must use appropriately selected equipment. Proper engineering evaluation remains essential.
RS485 is widely used in industrial and building-automation systems because it supports reliable communication over practical distances and can connect multiple devices on a common bus. The SDM630-M uses Modbus RTU, a communication protocol familiar to many energy-management, automation, and control-system integrators.
The meter supports network addresses from 001 to 247. This allows multiple meters to share a communication network, provided that each device has a unique address and the bus is designed correctly. The maximum stated transmission distance is 1000 meters, although actual performance depends on cable type, installation environment, topology, grounding, termination, baud rate, and electromagnetic conditions.
Selectable transmission speeds range from 2400bps to 38400bps. Parity can be set to none, odd, or even, and stop bits can be set to one or two. These options make it easier to match the meter with an existing data-acquisition system or controller.
With a response time of less than 100 milliseconds, the meter can support regular polling in many monitoring applications. The appropriate polling interval depends on the number of connected devices, communication speed, supervisory software, and the importance of each measurement. Energy monitoring generally does not require the same scan rate as fast industrial protection, so the interface is well suited to supervisory measurement and management tasks.
Measured values can be collected by a gateway and transferred to a local or cloud-based energy platform. A gateway may aggregate data from multiple meters, translate protocols, store historical information, or provide connectivity to Ethernet, cellular, wireless, or other networks.
In a commercial building, meters can be distributed across tenant areas, floors, air-conditioning systems, lighting panels, and common services. The data can then be used for tenant billing, cost allocation, energy benchmarking, and identification of unusual consumption. In an industrial plant, meters can be assigned to production lines, workshops, compressors, pumps, or process areas.
Modbus communication also supports integration with programmable logic controllers and supervisory control systems. Operators can use live measurements for dashboards, alarms, load management, and reporting. When combined with a suitable data platform, the meter becomes part of an ongoing energy-improvement process rather than a standalone display device.
The two pulse outputs provide a straightforward method of transmitting energy-related pulses to external equipment. Pulse collection can be useful when integrating the meter with a system that does not support Modbus or when a simple energy total is sufficient.
Pulse outputs can also operate alongside RS485 communication. For example, a controller may use pulse input for a basic real-time counter while the energy-management platform retrieves detailed electrical parameters through Modbus. This dual-interface capability gives installers more options when working with mixed or legacy systems.
Accuracy is central to any energy meter used for cost allocation, performance analysis, or operational decision-making. The SDM630-M specifies measurement accuracy for voltage, current, frequency, power factor, active power, reactive power, and apparent power. It also provides defined active- and reactive-energy classes under recognized IEC and EN standards.
Active power, reactive power, and apparent power are specified at ±1%. Voltage and current are specified at ±0.5%, while frequency is specified at ±0.2%. These specifications describe the measurement performance under the conditions defined by the applicable product and measurement standards. Actual system accuracy also depends on installation quality, supply conditions, conductor arrangement, temperature, electromagnetic interference, and correct configuration.
The meter’s active-energy classifications include Class 1 and Class 0.5 according to IEC 62053-21, and Class B and Class C according to EN 50470-3:2022. The standards use different classification systems, so the selected model should be matched to the regulatory and commercial requirements of the project.
The product has been assessed and certified as meeting the requirements of EU Directive 2014/32/EU. This is relevant for applications where measuring instruments are subject to European regulatory requirements. Certification does not replace correct installation or local approval procedures, but it provides an important foundation for projects requiring compliant energy measurement.
For measurement confidence, commissioning teams should compare the meter’s displayed values with expected system conditions. They should confirm that phase voltages are present, currents correspond to the connected loads, active power direction is correct, and imported or exported energy registers respond as intended. Communication readings should also be checked against the front display or a trusted reference where appropriate.
The product is manufactured by Eastron Electronic Co., Ltd., a high-tech electricity-product and energy-measurement company headquartered in Jiaxing, China. The company develops and produces electricity meters, power analyzers, current sensors, communication modules, and management systems. Its product focus is closely aligned with the requirements of modern electrical monitoring, where accurate sensing and dependable communications must work together.
The company’s location near Shanghai, Hangzhou, and Jiangsu places it within a major manufacturing and technology region. Its development activities are supported by teams in China and the United Kingdom. Cooperation with universities and research institutions contributes to the development of new technologies and products for electricity measurement.
A significant strength is the company’s investment in its own professional laboratory. The laboratory is capable of performing electromagnetic compatibility, low-voltage directive, accuracy, and environmental tests according to IEC, EN, GB, and UL standards. In-house testing can help engineers identify design weaknesses earlier, evaluate product performance under different conditions, and maintain more consistent development and verification processes.
EMC testing is important for products installed near switching equipment, drives, contactors, power supplies, and communication devices. LVD-related testing supports evaluation of electrical safety. Accuracy testing checks the measurement chain, while environmental testing helps assess performance under temperature, humidity, and other operating conditions. Together, these capabilities contribute to a more systematic approach to product reliability.
The company also holds patented technologies in software, embedded software, and hardware. For a multifunction energy meter, these areas are closely connected. Hardware determines how electrical signals are sensed and processed. Embedded software manages calculations, display behavior, registers, communication, and configuration. System-level software supports the wider energy-management environment.
The company operates under an ISO 9001 quality-management system. This indicates a structured approach to documented processes, corrective actions, continual improvement, and customer-focused quality management. Production has also been approved by SGS according to MID standards, supporting the company’s position in regulated energy-metering markets.
These manufacturing and development strengths are relevant when comparing energy-meter suppliers. A meter is not simply a display and a set of terminals. It is a measurement instrument that must combine sensor design, signal processing, firmware, communications, safety engineering, production control, verification, and long-term technical support. A supplier with capabilities across these areas can offer a stronger foundation for professional projects.
DIN rail installation is familiar to electrical contractors and panel builders. It allows the meter to be mounted alongside circuit protection, contactors, terminal blocks, communication devices, and other modular equipment. A compact modular layout can simplify panel planning and make future maintenance more convenient.
The direct 100A connection reduces the number of components required in suitable circuits. Panel builders may be able to avoid installing three external CTs, CT shorting arrangements, additional secondary wiring, and extra mounting hardware. Fewer components can make the wiring diagram easier to understand and reduce the time required for inspection.
System integrators benefit from the combination of local indication and communications. On-site technicians can review values at the meter, while the central platform can collect data remotely. If the communication network is temporarily unavailable, the local display remains useful for checking the electrical system during troubleshooting and commissioning.
Support for multiple wiring configurations also improves product standardization. An integrator working across several types of small distribution systems may be able to specify one meter family for multiple projects. Standardized equipment can simplify procurement, training, installation procedures, spare-parts management, and documentation.
Password-protected configuration is another practical feature. It helps limit unauthorized modification of network addresses, communication parameters, and other settings. In a multi-meter installation, controlled configuration is important because an accidental address change or inconsistent baud rate can disrupt communication with the supervisory system.
In offices, retail centers, hotels, and mixed-use buildings, the meter can provide sub-metering for tenants, floors, departments, or major services. Building operators can compare energy use between areas and identify opportunities for reducing unnecessary consumption.
Air-conditioning systems, elevators, lighting panels, kitchens, server rooms, and common-area services can be monitored separately. This makes energy information more actionable than a single whole-building meter. If a particular area shows an unexpected increase in current or apparent power, maintenance personnel can investigate before the issue becomes a larger operational problem.
Manufacturing plants often contain multiple production lines and a range of motor-driven equipment. The meter can monitor selected feeders, workshops, compressors, pumps, and auxiliary systems. Active, reactive, and apparent power values help engineering teams evaluate how equipment affects the distribution network.
Maximum demand information can support production scheduling and capacity management. If several high-power machines start simultaneously, the resulting demand peak may be visible in the monitoring data. Plant managers can use this information to coordinate operating schedules or consider demand-control measures.
Bidirectional measurement makes the meter suitable for selected photovoltaic, battery, and distributed-generation monitoring points. It can record energy imported from the grid and energy exported from the facility. This supports analysis of self-consumption, generation performance, and power-flow behavior.
In a solar installation, a meter may be used at the grid connection point, at an inverter output, or on a building distribution feeder, depending on the system design. The correct measurement location and direction must be defined during engineering so that the imported and exported registers have the intended meaning.
Electric vehicle charging sites require clear information about energy use, feeder loading, and demand. The meter can monitor a charger circuit or a group of chargers where the current and voltage fall within the product’s specifications. Modbus data can be combined with charging-management software to evaluate load profiles and identify periods of high demand.
For installations involving billing or regulatory measurement, the project designer must confirm whether the meter’s certification and accuracy class meet the specific requirements of the charging application and jurisdiction. The product’s MID status may be valuable, but the complete application must still be assessed against local rules.
Sub-metering allows building operators to allocate electricity costs according to actual consumption rather than using a general estimate. The meter’s three-phase capability and direct 100A connection can be useful for apartments, commercial units, workshops, and small premises with individual distribution boards.
RS485 networking allows many meters to be connected to a central collection system. This can reduce manual reading and provide more frequent data for billing, reporting, and maintenance. The compact DIN rail format is also suitable for organized metering panels where space is limited.
Energy auditors can use multifunction measurements to establish a baseline for a facility. Recording voltage, current, active power, reactive power, power factor, and energy over time can reveal the operating profile of major loads.
After an efficiency improvement, the same measurement point can be used to verify results. For example, a facility may assess whether a motor upgrade, lighting replacement, power-factor correction project, or operating-schedule change has delivered the expected benefit.
| Parameter | Specification |
|---|---|
| Product type | Three-phase multifunction energy meter |
| Mounting | DIN rail |
| Maximum direct current | 100A |
| Rated current | 10A |
| Minimum current | 0.3A |
| Starting current | 40mA |
| Supported wiring | 3P4W, 3P3W, and 1P2W |
| Rated voltage | 230V line-to-neutral or 120V line-to-neutral |
| Operational voltage | 80% to 120% of rated voltage |
| Measurement basis | RMS including harmonics on three-phase AC systems |
| Voltage accuracy | ±0.5% |
| Current accuracy | ±0.5% |
| Frequency accuracy | ±0.2% |
| Power-factor accuracy | ±1% |
| Active, reactive, and apparent power accuracy | ±1% |
| Active-energy accuracy | Class 1 or Class 0.5 IEC 62053-21; Class B or Class C EN 50470-3:2022 |
| Reactive-energy accuracy | Class 2 IEC 62053-23 |
| Outputs | Two pulse outputs and RS485 Modbus RTU |
| Modbus address | 001 to 247 |
| Transmission distance | Up to 1000m maximum under suitable conditions |
| Transmission speed | 2400bps to 38400bps |
| Parity | None, odd, or even |
| Stop bits | One or two |
| Response time | Less than 100 milliseconds |
The table summarizes the principal information available for the product. Project specifications should also include the precise model variant, certification marking, operating environment, enclosure requirements, wiring diagram, communication register map, and applicable local installation rules. Where a project requires a specific accuracy class or regulatory approval, the purchaser should confirm the exact version before ordering.
Installation should be carried out by qualified personnel familiar with low-voltage electrical systems and the applicable national standards. Before work begins, the circuit must be isolated and verified as de-energized. The meter should be installed in a suitable enclosure with adequate protection against accidental contact, contamination, moisture, and mechanical damage.
The wiring configuration must be selected before connection. A 3P4W installation normally includes three phase conductors and a neutral, while a 3P3W arrangement does not use a neutral in the same manner. A 1P2W configuration uses one phase and neutral. The terminal arrangement and wiring diagram for the exact model must be followed carefully.
Current direction is important for bidirectional measurement. Incorrect orientation or reversed current wiring can cause imported energy to appear as exported energy, or can produce unexpected power-factor and power readings. After energizing the installation, technicians should verify the sign and magnitude of each phase’s power and compare the total with the known operating condition.
Voltage and current ratings must be checked against the real circuit. The meter’s maximum direct current is 100A, and the stated rated and minimum currents should be considered when evaluating the expected load range. A circuit that regularly exceeds the maximum rating requires a different measurement arrangement, potentially involving external CTs and another compatible meter.
RS485 installation requires attention to network topology and communication settings. Devices should normally be arranged in an appropriate bus configuration rather than connected through uncontrolled star branches. Cable selection, shielding, grounding, termination, and separation from high-noise power conductors can influence communication reliability.
Each meter on a shared Modbus network must have a unique address. All devices that communicate together must use compatible baud rate, parity, and stop-bit settings. After configuration, the installer should test reading access, confirm that the returned values correspond to the correct meter, and document the address and settings for future maintenance.
Pulse-output wiring should be isolated and connected according to the requirements of the receiving equipment. The pulse constant, scaling factor, and interpretation of each output should be documented. Where pulse counting is used for billing or formal reporting, the complete chain from meter to data logger should be verified.
The SDM630-M offers several advantages over basic energy meters that display only a single cumulative kilowatt-hour value. Its multi-measurement capability gives users a more complete understanding of electrical behavior. This can reduce the need for separate instruments and provide a more coordinated data set for analysis.
It also offers advantages over meters that lack communication. Manual readings may be adequate for occasional checks, but they are labor intensive and provide limited visibility into changes between reading dates. RS485 Modbus enables automated collection, regular logging, alarms, dashboards, and integration with energy-management software.
Compared with a meter designed only for one wiring arrangement, its support for 3P3W, 3P4W, and 1P2W systems provides greater application flexibility. This can help distributors, contractors, and system integrators standardize equipment across different projects.
Compared with CT-based solutions for circuits within the 100A direct-connection range, the product can reduce installation complexity. It eliminates the requirement for external current transformers in suitable applications and can help preserve valuable panel space. The result is a compact and cost-effective measurement solution.
Compared with non-certified monitoring meters, its MID-related assessment and available active-energy classifications provide a stronger foundation for applications where measurement status and accuracy are important. Certification requirements vary by application, so users should verify that the exact model meets the intended legal and commercial purpose.
Reliable energy measurement depends on more than nominal accuracy. The meter must maintain stable operation while exposed to the electrical and environmental conditions found in real installations. This is why EMC, safety, accuracy, and environmental testing are important parts of the development and manufacturing process.
EMC evaluation helps determine whether the meter can operate correctly in the presence of conducted and radiated disturbances and whether it can avoid causing unacceptable interference to other equipment. This is particularly relevant in modern panels that may contain variable-frequency drives, switching power supplies, contactors, relays, and communication equipment.
Accuracy testing verifies the measurement chain under controlled conditions. It supports calibration, product validation, and consistency between units. Environmental testing contributes to confidence that the product can operate within its specified conditions when exposed to changes in temperature, humidity, and other environmental factors.
The company’s laboratory capability allows these test categories to be addressed within its own professional testing environment. Combined with ISO 9001 quality management, engineering teams, patented hardware and software technologies, and certification experience, this provides a structured basis for product development and production control.
Long-term reliability also depends on the availability of technical support. Eastron serves customers in more than 50 countries across Europe, Asia-Pacific, America, the Middle East, and Africa. International experience can help the company understand different project requirements, communication environments, standards, and application expectations.
Installing a meter is only the first step in improving energy performance. The greatest value comes from using the collected data to support decisions. A facility can establish a baseline, identify abnormal conditions, compare operating periods, and evaluate the results of corrective actions.
For example, a building operator may observe that apparent power remains high during periods when active power is relatively low. This could justify an investigation into reactive loads and power factor. An industrial user may discover that one production line causes recurring demand peaks. A solar operator may compare generation, self-consumption, and export behavior across different days or seasons.
Communication allows the information to be presented in context. A dashboard can combine energy data with production volume, occupancy, weather, operating schedules, or equipment status. This makes it easier to distinguish normal changes from abnormal consumption and to calculate meaningful performance indicators.
Energy data can also support maintenance. Gradual changes in current, power factor, or voltage may indicate a developing issue. While the meter is not a protective relay or a replacement for specialized power-quality equipment, it can serve as an important monitoring point that alerts personnel to conditions requiring further investigation.
When multiple meters are installed, users can compare similar areas or circuits. Benchmarking can reveal which buildings, departments, machines, or tenants have the greatest energy intensity. The results can support targeted efficiency projects rather than broad measures that may not address the main source of consumption.
Before selecting the meter, designers should define the electrical system and the intended measurement purpose. Important questions include whether the system is 3P3W, 3P4W, or 1P2W; whether the rated voltage is compatible; whether the maximum current remains below 100A; whether energy must be measured in both directions; and whether the application requires a particular accuracy class or certification.
The required communication method should also be identified. If a building-management platform already uses Modbus RTU, the RS485 interface can be integrated directly or through a suitable gateway. If a legacy system accepts pulses, the pulse outputs may be used. Some installations may use both interfaces for redundancy or different levels of data access.
Panel space and wiring practices should be reviewed. The DIN rail format is convenient, but the enclosure must still provide adequate clearance, segregation, ventilation where required, and access for inspection. The direct-connection terminals and associated protective devices must be matched to the conductor size and installation method.
For multi-meter projects, the network plan should be prepared in advance. The designer should assign addresses, select communication parameters, determine cable routes, consider maximum distance, and define how the gateway or controller will poll the devices. Proper documentation reduces commissioning time and makes future troubleshooting easier.
Finally, the project should specify how data will be used. A meter installed for basic display may require only local access. A meter intended for tenant billing, energy reporting, or automated control will require a carefully designed data architecture, data-retention policy, and verification procedure.
It is a three-phase multifunction energy meter mounted on a DIN rail. It measures electrical parameters and energy for 3P3W, 3P4W, and 1P2W systems.
The meter supports direct connection up to 100A. Circuits exceeding the specified limit require a different measurement arrangement and should not be connected directly to the meter.
Not for suitable circuits within its 100A direct-connection rating. Avoiding external CTs can simplify installation, reduce component count, and save panel space.
Yes. The product supports bidirectional measurement, allowing users to monitor energy flowing into a facility and energy exported from it.
The meter supports three-phase four-wire, three-phase three-wire, and single-phase two-wire supplies, subject to the rated voltage and wiring requirements of the selected model.
It can measure or calculate kilowatt-hours, kilovolt-ampere reactive hours, active power, reactive power, apparent power, voltage, current, frequency, power factor, maximum demand, and related electrical values.
Yes. It provides RS485 Modbus RTU communication. Network addresses from 001 to 247, baud rates from 2400bps to 38400bps, selectable parity, and one or two stop bits are supported.
The two pulse outputs can transmit energy pulses to a compatible counter, logger, controller, or monitoring device. They are useful for simple collection systems or installations that combine pulse counting with Modbus data.
Yes. The RS485 Modbus interface allows the meter to communicate with gateways, building-management systems, energy-management software, PLCs, and supervisory platforms.
The product information specifies Class 1 or Class 0.5 under IEC 62053-21 and Class B or Class C under EN 50470-3:2022, depending on the selected version.
Reactive energy is specified as Class 2 according to IEC 62053-23.
The stated rated voltage is 230V line-to-neutral or 120V line-to-neutral. The operational voltage range is 80% to 120% of the rated voltage.
Installation should be completed by qualified electrical personnel using the wiring diagram for the exact model. The circuit must be isolated during installation, and phase connections, current direction, protective devices, conductor ratings, and communication wiring must be checked before commissioning.
Its MID-related assessment and available accuracy classifications may support selected regulated or commercial measurement applications. However, billing suitability depends on the exact model, jurisdiction, contract, installation method, and applicable legal requirements. These conditions should be confirmed before use.
The manufacturer develops electricity meters, power analyzers, current sensors, communication modules, and energy-management systems. It operates a professional laboratory for EMC, LVD, accuracy, and environmental testing and follows ISO 9001 quality management. Its production is approved by SGS according to MID standards.
The SDM630-M combines the functions needed for modern three-phase energy monitoring in a compact DIN rail product. Its 100A direct connection can simplify installations that would otherwise require external CTs. Support for 3P3W, 3P4W, and 1P2W systems improves application flexibility, while bidirectional measurement extends its usefulness to renewable generation, storage, and changing power-flow environments.
Its measurement range includes energy, voltage, current, power, frequency, power factor, demand, and related values. Two pulse outputs provide a simple integration method, and RS485 Modbus RTU enables connection to centralized energy-management systems. These features make the meter suitable for commercial buildings, industrial facilities, sub-metering, renewable-energy installations, charging infrastructure, and energy-efficiency projects.
The product’s value is strengthened by the manufacturer’s broader engineering and manufacturing capabilities. Development teams in China and the United Kingdom, cooperation with universities and institutions, patented hardware and software technologies, professional in-house testing, ISO 9001 quality management, and experience with MID-related production all contribute to a structured approach to product reliability and compliance.
For users seeking a practical balance of accuracy, connectivity, flexibility, and installation efficiency, a directly connected three-phase multifunction meter can be an effective foundation for electrical monitoring. When correctly selected, installed, configured, and integrated, it can transform raw electrical measurements into useful information for cost control, equipment management, operational planning, and long-term energy improvement.
IEC 62053-21, Electricity Metering Equipment: Particular Requirements for Static Meters for AC Active Energy.
IEC 62053-23, Electricity Metering Equipment: Particular Requirements for Static Meters for Reactive Energy.
EN 50470-3:2022, Electricity Metering Equipment: Particular Requirements for Static Meters for Active Energy.
European Union Directive 2014/32/EU on Measuring Instruments.
ISO 9001, Quality Management Systems: Requirements.
Modbus Application Protocol Specification and Serial Line Implementation Guidance.
Manufacturer product information for the SDM630-M three-phase multifunction energy meter.
Manufacturer technical information concerning electricity meters, power analyzers, current sensors, communication modules, testing laboratories, and MID-related production.
Your email address will not be published. Required fields are marked *
We develop and produce high performance electricity meters, power analyzers, current sensors, communication modules and management systems.
Address：NO. 52, Dongjin Road, Nanhu, Jiaxing, Zhejiang, China
Copyright @ Eastron Electronic Co., Ltd. All rights reserved
