English
Español
Deutsch
中文简体
Product Consultation
Your email address will not be published. Required fields are marked *
Rogowski Coil Connect 96x96 Panel Mounted Multi-function Power Analyzer
Nov 24,2022
Ethernet Modbus Gateway 96x96 Panel Mounted Multi-function Power Analyzer
Aug 11,2022
DI/DO Ethernet Modbus TCP 96x96 Panel Mounted Multi-function Power Analyzer
Aug 10,2022
Ethernet Modbus TCP 96X96 Panel Mounted Multi-function Power Analyzer
Aug 10,2022
DI/DO RS485 Modbus 96x96 Panel Mounted Multi-function Power Analyzer
Aug 10,2022
RS485 Modbus 96X96 Panel Mounted Multi-function Power Analyzer
Aug 03,2022Content
Modern electrical installations require more than a simple voltage or current display. Facility operators, energy managers, maintenance teams, system integrators, and power-quality specialists need dependable instruments that can measure electrical parameters, identify abnormal operating conditions, communicate with supervisory systems, and support practical control functions. A panel-mounted power analyzer must therefore combine measurement accuracy, a clear user interface, flexible communication, reliable construction, and straightforward installation.
The Smart X96-5I is designed for this role. It is a 96 x 96 mm multifunction power analyzer for single-phase and three-phase electrical systems. The instrument supports 3P3W and 3P4W systems, uses 5 A current-transformer inputs, provides digital input and output functions, and supports both RS485 Modbus RTU and Ethernet Modbus TCP/IP communication. Its measurement capabilities extend from fundamental voltage and current values to active, reactive, and apparent power, energy, frequency, power factor, maximum demand, and harmonic information up to the 63rd harmonic.
In practical terms, the device combines the functions of a panel meter, energy meter, power-quality monitoring instrument, alarm interface, communication gateway, and basic control component. This integrated approach can reduce the number of separate devices required in a switchboard or control panel. It can also simplify data collection by making electrical information available locally through the display and remotely through industrial communication networks.
Electrical systems are becoming more distributed and more dynamic. Variable-frequency drives, switching power supplies, LED lighting, battery systems, solar inverters, electric vehicle charging equipment, and automated production machinery can all influence the quality and stability of an electrical network. A conventional ammeter may show that current is present, but it cannot normally explain how that current is distributed among phases, whether the load is balanced, whether harmonics are increasing, or whether the power factor is deteriorating.
A multifunction power analyzer addresses these requirements by collecting several categories of information in one device. The Smart X96-5I measures phase-related electrical quantities, calculates power and energy values, and provides harmonic and distortion information. This helps users move from simple observation to structured energy management and preventive maintenance.
The device is suitable for low-voltage distribution boards, motor control centers, commercial buildings, industrial machines, renewable-energy systems, energy-management projects, and intelligent power-grid applications. Because it is panel mounted, the operator can view essential information directly at the location where electrical equipment is installed. Because it supports network communication, the same information can also be forwarded to a building-management system, industrial control platform, data logger, or energy-management software package.
The product supports measurement on 1P2W, 3P3W, and 3P4W systems according to the supplied product information. This range allows one analyzer family to serve different wiring arrangements. It can be configured for a broad range of current-transformer and potential-transformer applications, giving system designers greater flexibility when adapting the instrument to existing switchboards and measurement points.
DI/DO Ethernet Modbus TCP 96x96 Panel Mounted Multi-function Power Analyzer
The Smart X96-5I is built around the principle of comprehensive electrical measurement. Rather than presenting only one or two values, it provides a broad set of readings that can be used for commissioning, operation, troubleshooting, reporting, and long-term analysis.
Voltage and current are the basic indicators of electrical system performance. The analyzer measures voltage in the range of 50 V to 600 V for 3P4W systems and 50 V to 480 V for 3P3W systems, according to the supplied specifications. The rated current input is 5 A, which is appropriate for use with external current transformers.
The current input arrangement allows the analyzer to be connected to circuits with much higher primary currents than the direct input rating. The specification lists a maximum current of 9999 A and a minimum current of 0.25 A, with a starting current of 20 mA. In applications where the primary current is substantially higher than 5 A, the correct current-transformer ratio must be selected and configured carefully.
Current and voltage readings can help identify phase imbalance, overloads, undervoltage, overvoltage, abnormal load changes, and wiring problems. When readings are available over a communication network, maintenance personnel can compare operating conditions across several feeders or buildings without visiting every panel.
The analyzer measures active power, reactive power, apparent power, and energy. These measurements are important because electrical loads do not all consume power in the same way. Active power represents the energy converted into useful work, heat, or other output. Reactive power is associated with magnetic and electric fields in inductive and capacitive equipment. Apparent power combines the effects of voltage and current and is important when sizing transformers, cables, switchgear, and generators.
Active energy measurement is specified at IEC 62053-22 Class 0.5S and IEC 62053-21 Class 1.0. Reactive energy accuracy is listed as 1.0 percent of the range maximum to IEC 62053-24. These specifications make the analyzer suitable for a wide range of monitoring and energy-accounting applications, subject to correct installation, calibration, wiring, transformer accuracy, and operating conditions.
Energy readings can be used to compare production lines, monitor tenant consumption, establish equipment baselines, analyze peak demand, and support energy-saving programs. The product information also identifies multi-tariff operation using a real-time clock as an available function. This can help users organize energy data according to different tariff periods where time-based electricity pricing is used.
Frequency is a fundamental indicator of the electrical supply. The analyzer measures frequency with an accuracy of 0.2 percent of mid-frequency, according to the supplied data. Frequency monitoring is useful in systems supplied by generators, isolated networks, microgrids, or equipment that is sensitive to supply variations.
Power factor indicates how effectively current is being converted into useful active power. A low power factor can increase current flow, raise losses, reduce available system capacity, and contribute to utility penalties in some installations. The analyzer specifies power-factor accuracy of 1 percent of unity, with a resolution of 0.01. Monitoring power factor at the feeder or equipment level allows operators to determine whether capacitor banks, filters, motor loading, or other corrective measures are required.
One of the product’s key differentiating functions is its ability to measure harmonic information up to the 63rd harmonic. The specifications list total harmonic distortion and individual harmonic distortion measurement, with THD accuracy of 2 percent to the 63rd harmonic.
Harmonic analysis is increasingly important because many modern loads draw nonsinusoidal current. Rectifiers, drives, power converters, computers, LED drivers, and charging systems can introduce harmonic components into the electrical network. Excessive harmonics may increase transformer heating, cause neutral-conductor stress, interfere with sensitive equipment, reduce capacitor-bank life, or create unexpected protection and control behavior.
Monitoring up to the 63rd harmonic provides a more detailed view than basic instruments that report only total distortion or a limited number of lower-order harmonics. The information can assist with diagnosing the source of distortion, assessing the effect of nonlinear loads, evaluating filter performance, and checking whether power-quality conditions are changing over time.
The analyzer does not replace a complete laboratory-grade power-quality investigation in every situation. However, it provides an accessible and practical level of harmonic visibility for continuous industrial and commercial monitoring. Its ability to combine harmonic data with voltage, current, power, and energy readings is particularly valuable because distortion can then be considered alongside the actual operating condition of the load.
Electrical measurement becomes significantly more valuable when it can be integrated into a wider information system. The Smart X96-5I supports RS485 Modbus RTU and Ethernet Modbus TCP/IP. These communication options allow the analyzer to serve both traditional serial networks and modern Ethernet-based control architectures.
The RS485 interface is specified as a two-wire half-duplex connection using Modbus RTU. Supported baud rates include 2400, 4800, 9600, 19200, and 38400 bits per second. The address range is 1 to 247, and parity can be set to none, even, or odd. One or two stop bits are supported.
These settings provide compatibility with a wide variety of programmable logic controllers, remote terminal units, gateways, data concentrators, and energy-management platforms. RS485 is widely used in electrical distribution environments because it supports multi-device networks over practical distances and can be installed with relatively simple cabling.
In a typical application, multiple analyzers can be installed at different feeders and connected to a central controller or communication gateway. The controller can periodically collect voltage, current, power, energy, power factor, frequency, and harmonic information. This creates a structured view of electrical behavior across a facility without requiring separate local readings.
Ethernet Modbus TCP/IP provides a direct path to network-based monitoring and automation systems. Compared with a purely local display or serial-only device, Ethernet communication can simplify integration into existing industrial networks and make data available to supervisory applications.
Networked measurement can support dashboards, alarm management, historical trending, remote diagnostics, production reporting, and energy-performance analysis. It can also reduce the need for independent protocol converters where Ethernet is already the preferred communication layer. System designers should still consider network topology, cybersecurity, access control, addressing, isolation, and the requirements of the host software when planning an installation.
The availability of both RS485 and Ethernet communication is a practical advantage over meters that support only one communication method. RS485 can be useful for compact device-level networks, while Ethernet can be advantageous for larger systems or sites with established industrial network infrastructure. The two options allow the product to fit into new installations as well as retrofit projects.
Measurement alone may not be enough for an automated electrical system. The Smart X96-5I includes digital input and output functions that expand its role beyond passive monitoring.
Digital inputs can be used to receive external status signals, such as breaker position, generator availability, protection status, contact closure, or pulse information from another device. The product information describes external signal counting as one of the intended applications. This means that the analyzer can help associate electrical measurements with equipment states or operating events.
Digital outputs can be used for alarm indication, external device control, or signaling to another control system, depending on the selected configuration and application requirements. The product description states that up to 30 types of parameters can be set for alarm. This gives users the ability to establish alarm conditions related to measured electrical values and operating states.
Alarm functions can be used to identify overcurrent, undervoltage, overvoltage, excessive demand, poor power factor, abnormal frequency, or high distortion. A well-designed alarm strategy can help maintenance teams respond before a minor deviation becomes an equipment failure or production interruption. Alarm thresholds should be selected carefully to prevent nuisance operation and should account for normal fluctuations in the installation.
SOE recording, or sequence-of-events recording, adds an additional level of operational visibility. When status changes and alarms are recorded with their time sequence, personnel can reconstruct what happened during a disturbance. This is valuable for troubleshooting intermittent problems, reviewing protection events, and comparing electrical changes with process events.
By combining measurement, digital I/O, alarm configuration, and SOE recording, the analyzer can act as a compact local intelligence point. It can collect information, evaluate conditions, provide a visual warning, transmit data, and participate in a broader control strategy.
A network connection is valuable, but local access remains essential. Operators often need to inspect a panel quickly during commissioning, maintenance, or an abnormal operating condition. The Smart X96-5I uses a backlit LCD display designed for full viewing angles. This supports local reading from different positions in front of a control cabinet or distribution board.
The display includes a bar graph for power indication. A graphical indication can make load changes easier to recognize than a numerical value alone. For example, an operator may immediately see that a feeder is approaching its normal operating limit or that the load has dropped unexpectedly.
A backlit interface is especially useful in electrical rooms with limited lighting. It also helps users read measurements during inspections when the panel is located in a cabinet, plant room, or service corridor. Clear local indication can reduce dependence on laptops or handheld communication tools for basic checks.
The display should be considered part of the overall diagnostic system. A technician can compare phase values, check whether a circuit is energized, verify that a current transformer is connected correctly, observe power direction, and confirm that the analyzer is communicating. These checks can be performed at the panel before deeper software-based analysis begins.
The analyzer has a 96 x 96 x 92 mm form factor and is intended for panel mounting. The panel cut-out is identified as vertical in the supplied specifications. Push-in installation and plug-in connection are listed among the product features, while the terminal description specifies shrouded screw-clamp terminals.
A standard 96 x 96 mm panel format is widely recognized in industrial instrumentation. It allows the device to fit into many existing switchboard and control-panel designs. For retrofit applications, the installer should confirm the available cut-out, panel thickness, rear clearance, wiring route, and access requirements before ordering or modifying the enclosure.
The stated weight is approximately 420 g. The front display has an IP51 degree of protection according to the product information. This rating is appropriate for protected indoor panel environments, but the complete installation must still protect the instrument from water, condensation, excessive dust, corrosive atmospheres, and mechanical impact.
The meter case is made from self-extinguishing UL 94 V-0 material. This material classification is an important construction feature for electrical equipment because it supports improved resistance to flame propagation when the product is used within an appropriate enclosure and installed according to applicable requirements.
Plug-in connection and accessible terminal arrangements can simplify service work. If a device needs to be replaced, a well-designed connection system can reduce rewiring time and lower the risk of introducing errors. Installers should follow the product manual for terminal assignments, current-transformer polarity, voltage connections, protective devices, grounding, and communication wiring.
Current-transformer circuits require particular care. A current transformer secondary must not be left open while the primary circuit is energized unless the transformer and installation design specifically permit that condition. Dangerous voltages can develop across an open secondary circuit. Appropriate shorting links, terminal arrangements, and isolation procedures should be used during commissioning and maintenance.
Voltage inputs must be connected through suitable protective devices and must match the system configuration. The measured-voltage limits differ between 3P4W and 3P3W systems, so the wiring mode and configuration must be verified before energizing the analyzer. Incorrect phase sequence, incorrect neutral connection, or reversed current-transformer polarity can produce inaccurate power and energy readings even when voltage and current values appear normal.
Communication cables should be routed away from high-energy switching conductors where practical. Proper shielding, grounding, termination, and network topology can improve communication reliability. Digital input and output circuits should be checked for their voltage, current, and isolation requirements before connection to external equipment.
Measurement accuracy is one of the most important factors when selecting a power analyzer. The supplied specifications identify the following typical performance values.
| Parameter | Specified accuracy or range |
|---|---|
| Active power | 1.0% of range maximum |
| Reactive power | 1.0% of range maximum |
| Apparent power | 1.0% of range maximum |
| Active energy | IEC 62053-22 Class 0.5S; IEC 62053-21 Class 1.0 |
| Reactive energy | 1.0% of range maximum to IEC 62053-24 |
| Frequency | 0.2% of mid-frequency |
| Current | 0.5% of range maximum |
| Voltage | 0.5% of range maximum |
| Power factor | 1% of unity, with 0.01 resolution |
| THD | 2% to the 63rd harmonic |
Accuracy should always be evaluated as part of the complete measurement chain. The performance of the analyzer depends on the quality and accuracy of the current transformers, potential transformers, wiring, fuses, installation environment, phase relationships, and configuration settings. A high-quality meter cannot compensate for an incorrectly sized or incorrectly installed transformer.
The product’s Class 0.5S active-energy specification is particularly relevant where energy measurement requires better performance than a basic indication meter. It can support more dependable energy allocation, consumption comparison, and monitoring applications. For legally regulated billing or revenue metering, users must confirm that the specific model, configuration, approval, sealing, installation, and local regulations meet the intended legal-metrology requirements.
Industrial and commercial electrical rooms can experience wide temperature variations, dust, vibration, electrical noise, and long operating periods without manual intervention. The supplied environmental specifications list an operating temperature range of -25°C to 55°C and a storage temperature range of -40°C to 70°C.
The humidity rating is less than 95 percent relative humidity at 50°C, non-condensing. The product is specified for pollution degree 2 and an altitude of up to 2000 m. These values provide useful guidance when evaluating whether the analyzer is suitable for a particular panel location.
Environmental suitability depends not only on the meter but also on the enclosure and installation. A panel installed outdoors may require a climate-controlled cabinet, heater, ventilation system, or additional environmental protection. Condensation must be prevented because moisture can reduce insulation performance, damage terminals, and affect long-term reliability.
For sites with strong vibration, corrosive gases, conductive dust, or high electromagnetic interference, the installation should be reviewed as a complete system. Cable routing, enclosure design, surge protection, grounding, and maintenance procedures all contribute to reliable operation.
The analyzer’s principal advantage is functional integration. A basic panel meter may display voltage or current, while a separate energy meter may measure consumption and a separate power-quality instrument may analyze harmonics. Adding independent communication modules, alarm relays, digital input devices, and event recorders can increase panel space, wiring complexity, configuration effort, and maintenance requirements.
The Smart X96-5I brings these functions together in one compact instrument. This can make it more efficient than a collection of single-purpose meters when the application requires broad electrical visibility. The 96 x 96 mm format provides a practical balance between a readable display and limited panel space.
A second advantage is communication flexibility. Devices that provide only local display may be unsuitable for modern energy-management projects, while devices with only one communication method may be difficult to integrate into mixed-generation systems. RS485 Modbus RTU supports established field networks, and Ethernet Modbus TCP/IP supports direct connection to network-oriented automation systems.
A third advantage is harmonic visibility. Many conventional energy meters provide energy readings without meaningful distortion analysis. Measurement up to the 63rd harmonic can offer a deeper understanding of nonlinear-load behavior. This is useful for facilities where power electronics, variable-speed drives, data equipment, or charging systems form a significant part of the load.
A fourth advantage is the presence of digital input, digital output, alarm, multi-tariff, and SOE capabilities. These features make the analyzer more useful in active control and event-analysis applications. Instead of simply recording what happened, the instrument can support responses to measured conditions and provide a timeline for reviewing disturbances.
A fifth advantage is installation practicality. A familiar panel size, front display, plug-in connection, and screw-clamp terminal arrangement can help reduce installation effort. The instrument can be used in new panels or added to existing systems where the available space and wiring design are compatible.
These advantages do not mean that one device is suitable for every possible application. High-end power-quality studies may require waveform capture, transient recording, advanced compliance reporting, or specialized synchronization. Revenue metering may require jurisdiction-specific certifications. However, for multifunction monitoring, energy analysis, alarm management, and industrial communication, the analyzer provides a strong combination of capabilities in a single panel-mounted platform.
The reliability of a measurement instrument depends not only on its published features but also on the manufacturer’s engineering, testing, production, and quality systems. Eastron Electronic Co., Ltd. is headquartered in Jiaxing, China, near major industrial and technology centers including Shanghai, Hangzhou, and Jiangsu. The company develops and produces electricity meters, power analyzers, current sensors, communication modules, and energy-management systems.
This product range indicates an integrated understanding of electrical measurement applications. A company that works across meters, sensors, communications, and management systems can design products with attention to the complete measurement chain rather than treating the meter as an isolated component.
The company has continued to invest in new technologies and products for electricity metering. Its development teams in China and the United Kingdom contribute to product development, embedded software, hardware design, and application engineering. Cooperation with universities and research institutions further supports the development of measurement and energy-management technologies.
For a multifunction analyzer, research and development capability is especially important. The product must process multiple electrical channels, calculate derived values, handle harmonic information, manage display functions, communicate through industrial protocols, store event information, and operate reliably under changing electrical conditions. These requirements involve analog measurement, digital signal processing, embedded software, communication engineering, and user-interface design.
Eastron has established a professional laboratory capable of performing EMC, LVD, accuracy, and environmental tests according to IEC, EN, GB, and UL standards. This type of testing infrastructure is a significant manufacturing strength because it allows product performance and compliance characteristics to be evaluated during development and production.
Electromagnetic-compatibility testing helps assess whether a device can operate in electrically noisy environments and whether it may interfere with other equipment. Low-voltage-directive-related testing supports evaluation of electrical safety. Accuracy testing verifies measurement behavior against defined references, while environmental testing helps evaluate operation under temperature, humidity, and related conditions.
In-house or closely managed laboratory capability can shorten development feedback cycles. Engineers can identify design weaknesses, adjust hardware or software, and repeat tests without relying entirely on external facilities. This supports more controlled product development and can improve consistency across product revisions.
The company follows the ISO 9001 quality-management system. A structured quality system helps organize design control, supplier management, production procedures, inspection, documentation, corrective action, and customer feedback. For electrical measurement equipment, these processes are important because small variations in components, assembly, calibration, or firmware can affect long-term performance.
The company’s production has also been approved by SGS according to MID standards, as stated in the supplied company information. Users should verify the exact approval status of the selected model and application, but this background demonstrates experience with demanding measurement-related quality and conformity requirements.
The company holds patented technologies in software, embedded software, and hardware, and has been recognized as a High-tech Enterprise and High-tech Research and Development Centre of Electricity Application. These achievements reflect an emphasis on technical development rather than simple product assembly.
Advanced manufacturing for an analyzer such as the Smart X96-5I involves more than placing electronic components on a circuit board. It requires controlled assembly, inspection of electrical connections, firmware management, functional testing, accuracy verification, display testing, communication testing, and final quality checks.
Measurement products must be manufactured with attention to component tolerances and signal-channel consistency. Current and voltage channels need stable analog behavior, appropriate isolation, dependable connectors, and accurate calibration. Communication interfaces must be checked for correct protocol operation. Digital inputs and outputs must be tested under suitable electrical conditions. The display and keypad or control interface must be checked for readability and reliable operation.
A mature manufacturing process normally includes traceability of key materials, standardized work instructions, production inspection, and final testing. These practices help ensure that products delivered at different times perform consistently and can be supported throughout their service life.
In factories, the analyzer can be installed at incoming feeders, production lines, motor-control centers, or major process loads. Operators can monitor demand, power factor, current balance, and harmonic distortion. Energy data can be compared among production areas to identify inefficient equipment or unexpected consumption.
Office buildings, shopping centers, hospitals, campuses, and hotels often contain many different load types. The analyzer can support submetering, tenant allocation, HVAC monitoring, lighting analysis, and central energy dashboards. Multi-tariff functionality can assist with time-based consumption analysis.
Solar inverters, battery systems, and microgrids require measurement of power direction, voltage, frequency, and energy flow. The analyzer can help operators observe imported and exported energy and integrate electrical information into a supervisory platform. System designers must confirm that the selected wiring arrangement, transformer configuration, and measurement direction meet the specific renewable-energy application.
Facilities with sensitive automation, data-processing equipment, drives, or electronic production systems can use harmonic readings to establish a baseline and identify changes. The analyzer’s 63rd-harmonic capability can provide useful information when distortion is suspected or when the effect of new equipment needs to be evaluated.
OEMs and system integrators can use the analyzer in equipment panels where electrical performance must be visible to operators and accessible to a control system. Digital inputs and outputs can connect the analyzer with machine states, alarms, or external control functions. Modbus communication can make electrical data available to the machine controller or supervisory software.
A successful installation begins with an accurate understanding of the electrical system. The designer should identify whether the circuit is 1P2W, 3P3W, or 3P4W, determine the nominal voltage and frequency, document the maximum primary current, and select compatible current transformers.
The current-transformer ratio must be entered correctly. The polarity and phase association of each transformer should be verified. The voltage phase sequence should also be checked. Incorrect phase mapping can result in misleading active power, reactive power, energy, and power-factor readings.
The communication plan should be prepared before installation. This includes selecting RS485 or Ethernet, defining device addresses, choosing baud rate and parity for Modbus RTU, planning network addresses for Ethernet, and confirming register requirements with the host system. A clear naming convention for each feeder or measurement point can make later data analysis much easier.
Alarm thresholds should be based on actual operating requirements rather than arbitrary values. Normal startup currents, production cycles, seasonal variations, and expected voltage fluctuations should be considered. Where digital outputs control external devices, the control logic should be reviewed carefully to prevent unsafe or unintended operation.
After installation, the system should be commissioned in stages. First, verify that the analyzer powers on and displays sensible voltage values. Next, confirm current readings and transformer ratios. Then check phase sequence, power direction, power factor, energy accumulation, communication, digital inputs, digital outputs, alarms, and event recording. A commissioning record should be retained for future maintenance and comparison.
Once installed, the analyzer can contribute to a long-term maintenance strategy. Historical voltage, current, demand, power factor, and harmonic data can show gradual changes that may not be visible during a single inspection. For example, rising current on one feeder may indicate process growth, insulation deterioration, mechanical loading, or an unplanned connection. Increasing distortion may indicate the addition of nonlinear equipment or degradation of filtering equipment.
Regular review of energy data can also support operational improvement. Facilities can compare consumption before and after equipment upgrades, identify high-demand periods, and evaluate whether corrective actions are achieving their intended results. When several analyzers are connected across a site, the data can be organized into a complete energy map.
Maintenance personnel should periodically inspect terminal tightness, communication connections, enclosure conditions, and the surrounding environment. Current-transformer circuits and protective devices should be included in electrical maintenance procedures. Alarm logs and SOE records should be reviewed after significant disturbances or equipment changes.
The analyzer’s integrated functions can reduce the number of separate devices that must be maintained. Fewer independent instruments may mean fewer display cut-outs, fewer communication interfaces, less wiring, and a more consistent user experience. This can create value over the entire service life of a project, not only during initial installation.
Before specifying the product, engineers should confirm the system voltage, connection type, current-transformer secondary rating, required accuracy, communication method, panel dimensions, environmental conditions, digital I/O requirements, and applicable certification needs.
It is also important to distinguish monitoring from legal metering. A device may provide excellent accuracy for operational measurement while a billing application may require specific approvals, seals, verification procedures, or installation rules. The exact model documentation should always be reviewed for the intended market and application.
For systems with severe transients, high fault levels, outdoor exposure, or unusual grounding arrangements, the complete installation should be assessed by a qualified electrical professional. The analyzer must be used within its electrical and environmental ratings, with suitable protection and safe working procedures.
It is a 96 x 96 mm panel-mounted multifunction power analyzer. It measures electrical parameters such as voltage, current, power, energy, frequency, power factor, and harmonic distortion. It also provides digital input and output functions and industrial communication interfaces.
The product information identifies support for 1P2W, 3P3W, and 3P4W systems. The primary product specification highlights 3P3W and 3P4W operation with 5 A current-transformer inputs. The correct wiring mode must be selected and configured for the application.
Yes. It supports THD and individual harmonic distortion measurement up to the 63rd harmonic. THD accuracy is listed as 2 percent to the 63rd harmonic.
The analyzer supports RS485 Modbus RTU and Ethernet Modbus TCP/IP. RS485 communication uses a two-wire half-duplex arrangement. The supplied specifications list baud rates from 2400 to 38400 bits per second and Modbus addresses from 1 to 247.
Yes. Its Modbus RTU and Modbus TCP/IP interfaces allow measured data to be collected by compatible energy-management software, industrial controllers, building-management systems, gateways, and data-acquisition platforms.
The rated current input is 5 A, normally used with external current transformers. The listed maximum current is 9999 A, subject to the selected transformer ratio and correct configuration.
Yes. The product information states that up to 30 types of parameters can be set for alarm. Alarm behavior should be configured according to the actual operating requirements and connected equipment.
Digital inputs can receive external status or pulse signals. Typical uses include breaker status, equipment state, external signal counting, and coordination with other control devices.
Digital outputs can provide alarm signals or control signals to external devices, depending on the selected product configuration and application design. The output circuit must be connected within its specified electrical limits.
SOE recording is listed as one of the product features. Sequence-of-events information can help users review the order and timing of alarms or status changes during an electrical disturbance.
The supplied specifications identify IEC 62053-22 Class 0.5S and IEC 62053-21 Class 1.0 for active energy. The exact suitability for billing or regulated metering must be confirmed for the selected model and jurisdiction.
The overall dimensions are listed as 96 x 96 x 92 mm. It is designed for panel mounting, and the supplied information identifies the panel cut-out as vertical.
Yes. The analyzer includes a backlit LCD display designed for full viewing angles, along with a bar graph for power indication. These features support local inspection and commissioning.
The operating temperature range is -25°C to 55°C. The storage temperature range is -40°C to 70°C.
Users should check the system wiring arrangement, voltage, current-transformer ratio, transformer polarity, phase sequence, auxiliary supply, panel cut-out, rear clearance, communication settings, environmental conditions, and applicable safety requirements.
The Smart X96-5I is designed for electrical systems that require more than basic local indication. Its combination of multifunction measurement, active and reactive energy monitoring, harmonic analysis to the 63rd harmonic, digital input and output, alarm capability, SOE recording, multi-tariff support, backlit display, RS485 Modbus RTU, and Ethernet Modbus TCP/IP creates a versatile platform for intelligent electrical monitoring.
Compared with conventional single-function meters, it can provide more information in less panel space and with fewer independent components. Compared with communication-limited instruments, it offers a choice between serial and Ethernet-based integration. Compared with basic energy meters, its harmonic and event-related functions provide deeper insight into power-quality and operating conditions.
The manufacturer’s research and development resources, professional laboratory, ISO 9001 quality-management approach, standards-oriented testing capability, product knowledge, and international service experience further support the product’s application value. These strengths are important when an analyzer will be installed in a critical distribution board or integrated into a larger automation and energy-management project.
When correctly selected, installed, configured, and maintained, the analyzer can help organizations understand electrical consumption, improve operational visibility, identify developing problems, support energy-efficiency initiatives, and connect field-level measurements with intelligent monitoring systems. It is therefore a practical choice for modern industrial, commercial, and infrastructure applications that require reliable, connected, and detailed electrical measurement.
IEC 62053-21, Electricity Metering Equipment — Particular Requirements — Static Meters for Active Energy.
IEC 62053-22, Electricity Metering Equipment — Particular Requirements — Static Meters for Active Energy, Classes 0.1S, 0.2S, and 0.5S.
IEC 62053-24, Electricity Metering Equipment — Particular Requirements — Static Meters for Reactive Energy.
IEC 60529, Degrees of Protection Provided by Enclosures.
UL 94, Standard for Tests for Flammability of Plastic Materials for Parts in Devices and Appliances.
Modbus Organization, Modbus Application Protocol Specification.
RS485 serial communication practice for industrial two-wire, half-duplex networks.
Product technical information for the Smart X96-5I multifunction power analyzer.
Manufacturer information concerning electricity meters, power analyzers, current sensors, communication modules, testing facilities, quality management, and energy-measurement solutions.
Your email address will not be published. Required fields are marked *
We develop and produce high performance electricity meters, power analyzers, current sensors, communication modules and management systems.
Address：NO. 52, Dongjin Road, Nanhu, Jiaxing, Zhejiang, China
Copyright @ Eastron Electronic Co., Ltd. All rights reserved
